Standard Speedy Moisture Tester

Standard Speedy Moisture Tester

The Standard Speedy 2000 series of moisture testers combines time proven dependability of the pressure test procedure with the convenience of an electric balance.

Moisture measurements are obtained by following a simple test procedure:

  • Prepare and weigh the material sample using the electronic balance.
  • Place the sample in the Standard Speedy vessel.
  • Add the reagent to the recess in the Standard Speedy cap and seal the vessel.
  • Shake the Standard Speedy to mix the reagent with the sample.
  • Read the moisture content directly from the integral gauge.

Building Restoration and Refurbishment

Building surveyors involved with diagnosing the cause of dampness in buildings use the Speedy tester to determine the moisture level in walls and floors. The Speedy complements moisture meters and hygrometers that are also used for diagnosis.

Moisture content in Solid Floors

If moisture related floor failures are to be avoided, concrete slabs, cementitious screeds and anhydrite screeds have to be in a dry condition before decorative floors finishes including wood, vinyl and carpet are laid. The Speedy tester is used to measure the moisture content of a sample of material removed from the floor before the decorative finish is laid.

Technical Specification

Moisture measurement range expressed as a percentage of the wet weight of the sample

0 - 20% (standard) - Model: F-S2000D
0 - 10% (option) - Mode: F-S2000C

Sample weight

0 - 20%mc (range: 6g)
0 - 10%mc (range: 12g)

Maximum sample size 10mm

Weight 5.5kg

Dimensions (cm) 51 x 38 x 20

Please Note:

All speedy moisture testers are supplied without reagent due to hazardous nature.

Please contact office to request a quote for shipping of bulk orders of reagent if needed.